web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#174196 10/11/06 02:34 PM
Joined: Oct 2006
Posts: 3
COO Offline OP
Member
OP Offline
Member
Joined: Oct 2006
Posts: 3
How do I reset this recently added Avanti 3015 phone. I have tried holding down the # while plugging in the phone "Clear DN" appears but then the "Perform Reset" message returns. The system has been programmed and the port assigned for this type of phone. I also read that typing the extension and then # (example 430#) or keying the port number then # may reset the phone ... both do nothing.
This is not an IP phone.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
Offline
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281
You can't DN the Avanti phones. All you should have to do is plug the phone in. Don't do anything else. What your Saying in the above posted is for a diffrent type of telrad phone. Is it saying on the display of the Avanti 3015 phone perform reset after it has initialitionzals (Sorry can't Spell). Than try resetting the whole system by turn the power off for ten seconds then turning it back on. You can try resetting that ULD card but I don't think that will work.

Joined: Oct 2006
Posts: 3
COO Offline OP
Member
OP Offline
Member
Joined: Oct 2006
Posts: 3
I tried the power down ... let it set for a minute then powered back up. Received the same "Perform Reset" message ... unplugged the phone... plugged the 3015 display phone back in .. it initializes then says DN=430 .. then "perform Reset".
I then flipped the 2 wires that connect the port and the physical wall outlet on the punch blocks(not even sure if this makes any difference)same result... I tried a completely different phone .. same result.
Any ideas

Joined: Aug 2002
Posts: 4,924
Likes: 1
Administrator
Offline
Administrator
Joined: Aug 2002
Posts: 4,924
Likes: 1
Try this phone on a known working port. Are you using eManager to program the system?

Joined: Feb 2005
Posts: 439
Member
Offline
Member
Joined: Feb 2005
Posts: 439
I would reset the phone system, after hours of course. If you don't want to do that, then you need to put the phone on a different port on that card, by moving it in programming with the F4 function, and punch the cross-connect to that port as well. Everytime I ran into that error, we had to perform a "system reset" to clear.

might make sure you are not running v7.36 as your system ver. if so, get with ssphone about an inexpensive upgrade. I have heard of a lot of problems with that particular ver.

Also, if you are using eManager to program, you may want to make sure you have the latest version of the eManager program on your pc. I think it is up to 3.0.0.2x or something.

Joined: Aug 2002
Posts: 4,924
Likes: 1
Administrator
Offline
Administrator
Joined: Aug 2002
Posts: 4,924
Likes: 1
Quote
Originally posted by Telradmaniac:
I think it is up to 3.0.0.2x or something.
eManager latest 3.1.0.5

Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
Offline
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281
A reset should have worked. I've had this problem myself. But if it still doesn't work, I would try reprograming the set on the same port. If that doesn't work deleted again and try it on another avaible port. Also try the telephone set right at the MDF and see if you still have the same problem. Also do what ss phones said and telemanic.

Joined: Oct 2006
Posts: 3
COO Offline OP
Member
OP Offline
Member
Joined: Oct 2006
Posts: 3
Gentlemen thank you for the input repeated shutdowns and reseating the card have not worked... I am going to try reprogramming, I do appreciate your input, Thank you.

Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
Offline
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281
No Problem!!!!!!!!!! Where here to HELP!!!!!


Moderated by  SSPhone 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5