|
Joined: Jun 2005
Posts: 3
Member
|
OP
Member
Joined: Jun 2005
Posts: 3 |
I have a question regarding a DVX Plus IV. Can I send DNIS over analog ports? The customer uses the DNIS to route the call to the proper station. Also does anyone know where I can pick up T1 cards with cables for this system? Part # IN9031-31 Plus 4 T1 V1.3SW
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2005
Posts: 15,378 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,378 Likes: 13 |
The system is pretty flexible, but can you elaborate a bit more on as to exactly what you are trying to do? This will help me to better understand your application.
As for the T1 card kits, I am pretty sure that Novus (Vodavi's authorized marketer of discontinued products) has them, still new in the box. Their number is 866-331-1112. Remember that their T1 card ONLY works on T1's and NOT on PRI's!
------------------ Ed --------- How come there's always enough time to go back and fix it a second time?
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: Jun 2005
Posts: 3
Member
|
OP
Member
Joined: Jun 2005
Posts: 3 |
Hi,
Thanks for the info on the T1 cards. We want to install a channel bank to break out the T1 into analog lines. We then want to cross connect the analog side of the channel bank to analog trunk ports on the DVX. When a call is made the originating switch will outpulse a DTMF DNIS number to the DVX. A specific DNIS can appear on any of the available 24 channels. Can the DVX receive the DNIS on an analog trunk port in the DVX and using the DNIS route to an extension or a group of extensions? Thanks for the help.
|
|
|
|
Joined: Jan 2005
Posts: 15,378 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,378 Likes: 13 |
If I understand you correctly, this can be done using a DID trunk card but the channel bank will need to be configured with FXO ports instead of the traditional FXS. If this can be done, then yes, the DVX will be able to receive, translate and route the calls to any extension(s).
I hope that my understanding is correct and that this helps.
------------------ Ed --------- How come there's always enough time to go back and fix it a second time?
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: Jun 2005
Posts: 3
Member
|
OP
Member
Joined: Jun 2005
Posts: 3 |
Thanks for the info - this is exactly what I was looking for
|
|
|
Forums84
Topics94,282
Posts638,758
Members49,764
|
Most Online5,661 May 23rd, 2018
|
|
2 members (mongo5150, Toner),
160
guests, and
117
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|