web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#209635 01/27/06 07:39 AM
Joined: Jan 2005
Posts: 15,378
Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
OP Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,378
Likes: 13
This is a listing of most frequently-asked questions when using only the following Vodavi telephone systems: ifinite Digital, Starplus Digital, Triad, Mach 1, DVXII, III or IV, DVXplus II, DVXplus III, DVXplus IV, STS, STSe, XTS, XTS-IP, XTXc and XTSc-IP:

SETTING THE SYSTEM'S DATE AND TIME:

At the main attendant's phone, without lifting the handset dial 692 + YY MM DD HH MM

YY=last two digits of the year;
MM=two digits for the month (01-12);
DD=two digits for the day (01-31);
HH=two digits for the hour (in military, 00-23);
MM=two digits for the minutes

A confirmation tone will be heard and the time/date will be updated.


MAKING CONFERENCE CALLS:

1. Make or receive first call, then press CONF button (do not press hold; the original call will be placed on hold automatically);

2. Make or receive second call, then press CONF button again.

3. Continue making or receiving calls and pressing the CONF button after each one.

4. Once all parties are on hold in conference mode, press the CONF button again and all parties will be joined together.

NOTE: The maximum number of outside parties that can be conferenced is five. Up to three inside parties can also be added to bring the combined total to eight and you count as one of them. Remember that you are limited to the total number of lines or loop buttons available on your phone to reach these maximums.

You may leave a conference, while leaving the outside parties connected. Just press your CONF button before hanging up. If you want to rejoin the conference, just press the CONF button to reenter.


LAST NUMBER REDIAL:

Press the speed button and #. This will call the last number dialed from the dial pad.


PROGRAMMING EXTENSIONS ON BUTTONS (DSS/BLF):

1. Press the speed button two times;
2. Press the button you wish to program;
3. Dial the extension number you want to appear on that button.
4. Continue from step 2 for additional buttons or press the on/off (speaker) button to end programming.


INTERCOM CALLS NOT COMING THROUGH CORRECTLY:

There are three modes the phone can be set for to determine how intercom calls arrive, Handsfree, Private or Tone:

Your phone either has an H-P-T switch or button, or HF-PV-TN switch on the front edge.

If it's a switch, then the H or HF position allows calls to be received and answered hands-free. P or PV allows calls to be received, but the recipient must lift the handset to talk back; the T or TN position forces the phone to ring on intercom calls.

If it's a button, then then when the button's light is off, it's in the Handsfree mode, if it's on steady, it's in the tone mode and if it's flashing, it's in the private mode.


Ed Vaughn, MBSWWYPBX
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#209636 11/20/09 10:44 AM
Joined: May 2002
Posts: 17,722
Likes: 18
Member
****
Offline
Member
****
Joined: May 2002
Posts: 17,722
Likes: 18
CID ISSUES STSE

Prior to FP2 to turn on CID logging do the following:
Flash 05 btn 21 "enable/disable system ICLID tables" default is disable.

FP2 and later:
Use Flash 50 page d button 11 for saving ICLID info, then flash 05 button 21.

FP3 Change to Answered/Unanswered calls:
Prior to SP3 659 for answered 635 for unanswered. With FP3 use 669 for both.

With FP3 using 669 for review:
Go to beginning of table Dial Code 669
Toggle between Name/Number MUTE
Step to next/previous table entry Volume Up/Down
Delete table entry (Attendant only)FLASH
Exit table review function ON/OFF
Call Back SPEED

If you see any errors or need something added please contact a forum moderator.


Retired phone dude
1 member likes this: Dman99

Moderated by  EV607797, JWRacedog, MnDave, nfcphoneman 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,695
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,707 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
teleco 4
Who's Online Now
3 members (dans, Toner, Curlycord), 101 guests, and 249 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5