|
|
|
|
Joined: Aug 2005
Posts: 391
Member
|
OP
Member
Joined: Aug 2005
Posts: 391 |
We have 2 t1's extended over fiber using rad's Optimux-4T1. connected is a predictive dialer we are getting a d channel error due to the voltage being to high i believe the voltage is 6.6db. Is there anything we can do to lower the voltage our provider says they can not do anything on their end and that it is checking out ok at the smarjack.
The Advance Noobie!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2007
Posts: 31
Member
|
|
Member
Joined: Mar 2007
Posts: 31 |
First of all, carrier is required to generate signal within a certain dB and dBx range. 6.6db is well within that, unless you have your card configured expecting something like 0dB.
Make sure you understand what the dB is and what it should be set at, then configure your card accordingly.
--
Only the fool fears asking a question.
|
|
|
|
Forums84
Topics94,284
Posts638,768
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, James D.),
122
guests, and
338
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
