I have two OfficeServ 7200 connected via SPNET protocol, and I can communicate between the extensions of the two buildings OK.
I need to make an outgoing call from a extension of the PBX 2, through a trunk line of the PBX 1.
PBX 1
System Link ID: 091
LCR Routing digits: 092 - Lenght 7 - Route Table 3 (803 SPNET)
Local extensions: 2100-2199
Loop Trunk: 7001-7008
N-LCR: 20
Network dial traslation: 20 to 09220 - Wait 4 - Max 7
PBX 2
System Link ID: 092
LCR Routing digits: 091 - Lenght 7 - Route Table 3 (803 SPNET)
Local extensions: 2000-2099
N-LCR 1: 21
N-LCR 2: 70
Network dial traslation 1: 21 to 09121 - Wait 4 - Max 7
Network dial traslation 2: 70 to 09170 - Wait 4 - Max 7
What should I do?