|
|
Joined: Mar 2012
Posts: 43
Member
|
OP
Member
Joined: Mar 2012
Posts: 43 |
I normally program SV8100s, DSX 40,80, and 160. I had a recent tech call on a Comdial Impression phone system using 2022s phones. One is stuck in Headset enabled and for the life of me I can not get it out of that mode? Any help will be greatly appreciated. Thanks in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
Program a headset enable button.
|
|
|
|
|
Joined: Mar 2012
Posts: 43
Member
|
|
OP
Member
Joined: Mar 2012
Posts: 43 |
I was thinking one was already programmed for it to be in enabled mode...I will try your suggestion and let you know..thanks a mil
|
|
|
|
|
Joined: Jul 2011
Posts: 317
Member
|
|
Member
Joined: Jul 2011
Posts: 317 |
jwooten is on the money, i forget the code off hand but if you google dsu manual it is in there. youll need a blank button to pgm on, if all of the buttons are lines you'll have to remove one of the lines from the button to do so.
|
|
|
|
|
Joined: Mar 2012
Posts: 43
Member
|
|
OP
Member
Joined: Mar 2012
Posts: 43 |
Jwooten and dtcd21...finally got back out to the site today and as per the manual I did the follwing
ITCM > **1 > program key > 94 > TC. However, after pressing the program key it says line on the screen and when I press 94 for headset it only shows the 4. Any suggestions?
|
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 16
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 16 |
Why transfer/Conf at the end? This is from the manual....
1. Press INTERCOM at the user’s telephone.
2. Dial * *1.
3. Select button to be programmed.
â€â€Press A1–A14, B1–B10.
4. Dial 94.
5. Press SPEAKER to end.
|
|
|
|
|
Joined: Mar 2012
Posts: 43
Member
|
|
OP
Member
Joined: Mar 2012
Posts: 43 |
good catch RBF, but when I press the button to be programmed it is showing line on the display screen and when I press 94 only the 4 shows up on the display...does that make sense how I explained it?
|
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 16
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 16 |
Blank a different button and retry...
|
|
|
|
|
Joined: Mar 2012
Posts: 43
Member
|
|
OP
Member
Joined: Mar 2012
Posts: 43 |
please don't flame me...I am familiar with NEC phone switches...having to learn this one on the fly but how do I blank another button..if you wouldn't rather not tell..I do understand.
|
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 16
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 16 |
Hopefully you downloaded a manual..they are readily available.
3.8.3 Blank Buttons
Description: Blank those buttons that you want to be dynamic line buttons or autodial buttons.
NOTE: When blanking buttons, be sure a previously assigned button is idle (feature
not selected by user) before you blank it.
To Program: 1. Dial 56. “BUTTON MAPPINGâ€Â
2. Dial 04. “BLANK/AUTODIALâ€Â
3. Select all buttons to be programmed
â€â€Press A1–A14, B1– B10.
4. Dial #.
5. Select station ports (LED On = Selected).
â€â€Station 10–57 = Dial 10–57 or press C10-C57.
6. Dial * for further button blanking
â€â€ORâ€â€
dial ** for next button mapping feature
â€â€ORâ€â€
dial *** for configuration mode.
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
143
guests, and
355
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)