|
|
|
|
Joined: Feb 2011
Posts: 5
Member
|
OP
Member
Joined: Feb 2011
Posts: 5 |
I have an Iwatsu ECS v5.21 that has a bunch of analog telephones with message waiting lights attached to it. Were using the IX_4EMC VML card. Some of the phones message lights continue to blink even after removing the lines from the system ( I think the voicemail system is just telling them to blink, but since these are SLT's, I have no idea how to turn it off) Checking the Defeat Message Waiting Light on the Omega VMI Editor has no effect. I also tried adjusting the settings under 10.61 (slt features) to no end.
Better to remain silent and be thought a fool than to speak out and remove all doubt.
~Mark Twain
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,796 Likes: 10
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,796 Likes: 10 |
Easiest thing to do is send a message to the blinking extension, wait a few minutes, then retrieve the message to tell the voice mail card that the light needs to be turned off.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Forums84
Topics94,287
Posts638,784
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, mongo5150),
109
guests, and
182
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
