|
Joined: Nov 2005
Posts: 1
Member
|
OP
Member
Joined: Nov 2005
Posts: 1 |
Executone amplifier (voice page, background music) looking for this same unit for replacement. There seems to be a buzz on the line and this unit seems to be the cause of it. I’m currently using a tuner strait to the system. No hum. I’don’t have music coming from the PA speakers (I may not have enough amps) only the phone and background hold. How do newer systems use a page/background system? Should I be replacing the Executone unit or get a powered tuner, or?????
Thanks for you input!
Thanks Chad
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
Member
Joined: Apr 2002
Posts: 1,101 |
If it is a Executone AMP.
They had two types:
1 was a tupe amp designed and manufacured by them
2 was a integrated 70 volt amp, designed and manufacured by Bogen foe Executone.
Also check your page port of the system. They are of the station card on the violet/slate pair. You can try swapping cards.
Good Luck!!
If all else fails, use a BFH.
|
|
|
|
Joined: Nov 2004
Posts: 1,580 Likes: 1
Moderator-ESI - Executone
|
Moderator-ESI - Executone
Joined: Nov 2004
Posts: 1,580 Likes: 1 |
I can't remember the code for turning the background music on or off over the paging system right now, But, Maybe somebody else remembers it?
I know for a fact this can be done, because I had a customer or two that did it everyday, because when the system did its soft reset in the middle of the night, it shut off the music.
I can see the light at the end of the tunnel..
Retirement 2019 ( It has happened )
|
|
|
|
Joined: Feb 2005
Posts: 1,037
Member
|
Member
Joined: Feb 2005
Posts: 1,037 |
Ver 5.4 or higher it's 85 + two digit zone number. Under 5.4 it 83 + two digit zone number. And needs to be done at the Operators Station.
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
139
guests, and
287
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|