|
|
Joined: Aug 2006
Posts: 15
Member
|
OP
Member
Joined: Aug 2006
Posts: 15 |
Howdy!
Have a customer who we just recently turned on the LCR. They have 20+ lines, but randomly they get "All Lines Busy" message when trying to dial out. We checked the programming and it's the same as another customer we have with the same LCR DB (which is not having the problem). Any ideas?!?
ps. Customer has Eclipse 2.5.1
Thank you in advanced.
"There is 10 kind of people in this world, those that understand binary and those that don't!!"
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2005
Posts: 828
Member
|
|
Member
Joined: Nov 2005
Posts: 828 |
Are all of the lines in the same trunk group? Does the Reports A screen note any times when all lines in a particular group are busy? Have you looked at the reports H screen? Is the LCR database the same, but created for another customer that has a different trunk configuration?
Mike
|
|
|
|
|
Joined: Aug 2006
Posts: 15
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 15 |
Originally posted by mforrence:
Are all of the lines in the same trunk group? Does the Reports A screen note any times when all lines in a particular group are busy? Have you looked at the reports H screen? Is the LCR database the same, but created for another customer that has a different trunk configuration?
Mike Yes, TG 1. No All Lines busy on Report A. and Yes, this is an LCR Db from another site. We just noticed that LCR class was set to 102 (they have Centrex lines), so we just changed it to 100. I guess is a matter of time now.
"There is 10 kind of people in this world, those that understand binary and those that don't!!"
|
|
|
|
|
Joined: Aug 2006
Posts: 15
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 15 |
Nope, Problem still there after couple of days. Any ideas or suggestions?!?! Thank You.
"There is 10 kind of people in this world, those that understand binary and those that don't!!"
|
|
|
|
|
Joined: Aug 2006
Posts: 6
Member
|
|
Member
Joined: Aug 2006
Posts: 6 |
Scanner, I recently had a similar issue at a customer of ours that used LCR. When they would try to dial a toll free number, they would get a recording saying that "all lines are busy" or "your call did not go thru". This was due to one of the carriers that the LCR routes calls thru was having issues or had changed their 1010 code. Essentially that is all LCR does is put the carrier's 1010 code in front of the call to force it to go thru them. If you are getting a recording telling you this, call your dial tone provider.
|
|
|
|
|
Joined: Aug 2006
Posts: 15
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 15 |
Thank you TRM, unfortunately the "All lines busy" message is on the IDS phone display, the call haven't even hit the line because LCR is not giving them the lines. If they press * then the call is routed thru the other service. But my main concern is why are we getting all line busy with available lines on the group?!?!
"There is 10 kind of people in this world, those that understand binary and those that don't!!"
|
|
|
|
|
Joined: Jan 2006
Posts: 18
Member
|
|
Member
Joined: Jan 2006
Posts: 18 |
just curious - no problem with dialing out before LCR install. Are all 20 trunks in trunk group 1? All exts have access to all lines - day and night. How many paths in LCR - all using trunk group 1?
|
|
|
|
Forums84
Topics94,287
Posts638,784
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
126
guests, and
186
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
