web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jul 2007
Posts: 10
Member
OP Offline
Member
Joined: Jul 2007
Posts: 10
We have a Sprint Protege CTX KSU (K32US4.F06) and ProtegeVoice SVP-4.

The system has already been configured by a phone technician.

The phone technician has programmed a keyset feature key as a voice mail "message waiting" key. Unfortunately, the "message waiting" feature no longer works (i.e. it is having amnesia and it does not light up when we receive a voice mail message). Of course, voice mail is still fully functional.

"Professor Shadow" has a post on how to reprogram the night service mode key already so would I just do as suggested previously to "program a feature under a feature key" except to use "F64" for the voice mail "Message Waiting" key?

The below is from "Professor Shadow" instructions for "program a feature under a feature key"

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press designated feature key to which to program feature.
4. Press soft key F3 below the word “chg.”
5. Press soft key F2 below the word “feat.”
6. Press the Function key and then enter the appropriate feature code number.
7. Press soft key F2 below the word “save” to
save selection.

Thank you for your help. Ken.

Joined: Jul 2004
Posts: 717
Likes: 1
Member
Offline
Member
Joined: Jul 2004
Posts: 717
Likes: 1
Ken,
When you press the voice mail key does it log into the voice mail?
Example:
Press the key labeled "voice Mail"
System should come back and say "Please enter your pass code"

If so, the problem may be with the voice mail.

Also,
To program a voice mail key you would use the instructions above, but a voice mail key is not a "feature key" it is a DIR, so when you get to the part where you see the choice of "Feat" , choose DIR.

DIR = directory number
Directory number for hunt groups start at 430, to see what hunt group the voice mail is in if you don't know, just go to any phone and dial 430 if the voice mail does not answer, then try 431, 432, etc.

Joined: Dec 2007
Posts: 6,799
Likes: 18
Retired Admin
*****
Offline
Retired Admin
*****
Joined: Dec 2007
Posts: 6,799
Likes: 18
Is this the same set that lost the Day/Night key? If so it sounds like the keyset defaulted.

Quick question: Is this a display or non-display keyset?

If this is on just one keyset then you can check the correct button code on a keyset that works fine.

The procedure for checking a button on a display set is:

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press designated feature key you wish to view.

Because non-display sets lack the display this procedure cannot work.

Programming a Feature Under a Feature Key

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press designated feature key to program feature to.
4. Dial 2.
5. Press the Function key and then enter the
appropriate feature code number.
6. Press the Hold key to save your selection.
7. Receive confirmation tone.

Programming a DSS Key

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press the feature key you wish to program.
4. Dial 1.
5. Enter the extension directory number.
6. Press the Hold key to save your selection.
7. Receive confirmation tone.

Programming a Speed Dial Number Under a Feature Key

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press the feature key you want to program.
4. Dial 1.
5. Enter the speed dial number.
6. Press the Hold key to save your selection.
7. Receive confirmation tone.

The confirmation tone is a single-ring, a error tone is a double-ring.

Done forget to update the time on your telephone system and also your Voice Mail system. This must me done through attendant programming on the Phone system (any display set) and attendant mailbox on the Voice Mail system (Attendant Mailbox).


Dean
Photographs:
https://www.instagram.com/deanwilsoncanby/
https://fstoppers.com/profile/deanwilsoncanby
https://www.facebook.com/Dean-Wilson-Photography-112841337020414

Please don't confuse your "Internet Search" with my licenses, certifications and over 30 years experience.

"Thank you for calling Technical Support. If you feel you have reached this number in error, please hang up and press redial."
Joined: Jul 2007
Posts: 10
Member
OP Offline
Member
Joined: Jul 2007
Posts: 10
Thank you for the replies.

To answer Walterv's questions:
[Q] When you press the voice mail key does it log into the voice mail?
[A] Yes it does log into the voice mail


To answer Professor Shadow's questions:
[Q] Is this the same set that lost the Day/Night key?
[A] Yes it is on the same set that lost the Day/Night key

[Q] Is this a display or non-display keyset?
[A] The keyset is a display


I guess I did not describe the question clearly.
Let me try again. We have a keyset with a display (699029). It has a feature code Function key that was programmed to "Voice Mail". When we got a voice mail, the light/LED next to the programmed feature key would light up indicating that we have voice mail message waiting. We then proceeded to pushing the voice mail feature key to retrieve the voice mail messages. Now, the light/LED next to the voice mail programmed feature key would NOT light up any more when we get new voice mail messages. So, the voice mail system is still working because we can retrieve all our messages but the light/LED next to the programmed feature key no longer lights up.

I believe that all I need to do is to some how reprogram something??? so that the voice mail light/LED on the handset is lit when there is a new voice mail waiting.

Thank you. Ken.

Joined: Dec 2007
Posts: 6,799
Likes: 18
Retired Admin
*****
Offline
Retired Admin
*****
Joined: Dec 2007
Posts: 6,799
Likes: 18
If this is on just one keyset then you can check the correct button code on a keyset that works fine.

The procedure for checking a button on a display set is:

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press designated feature key you wish to view.

The code for the working key will either be

  • F64
  • DIR XXX


Once you have the correct code then you can program F64 by:

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press designated feature key to which to program feature.
4. Press soft key F3 below the word “chg.”
5. Press soft key F2 below the word “feat.”
6. Press the Function key and then enter the feature code number 64
7. Press soft key F2 below the word “save” to
save selection.

If the code a DIR number then:

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press the feature key you wish to program.
4. Press soft key F3 below the word “chg.”
5. Press soft key F1 below the word “dir.”
6. Enter the resource directory number. (430 et cetera)
7. Press soft key F2 below the word “save” to save the selection.
8. Receive confirmation tone.


Dean
Photographs:
https://www.instagram.com/deanwilsoncanby/
https://fstoppers.com/profile/deanwilsoncanby
https://www.facebook.com/Dean-Wilson-Photography-112841337020414

Please don't confuse your "Internet Search" with my licenses, certifications and over 30 years experience.

"Thank you for calling Technical Support. If you feel you have reached this number in error, please hang up and press redial."

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,695
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,707 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
teleco 4
Who's Online Now
4 members (Touch Tone Tommy, Toner, curtonpond, Curlycord), 81 guests, and 244 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5