web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Apr 2011
Posts: 200
Tariq Offline OP
Member
OP Offline
Member
Joined: Apr 2011
Posts: 200
Dear all, We are in big trouble as Local Central office exchange replaced the Alkatel switch with Huawei switch and Cli stopped working on Samsung PABX model OS7400,OS7200 and OS500.

It seems that there are some changes in Huawei Cli pattern ,What to change in Samsung

ANY BODY CAN HELP ME ITS URGENT

Thanks

Tariq

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
What lines? PSTN? ISDN (BRI or PRI)?

I've seen in OS7000 4.60b there is a setting for CID type on PSTN trunks (ETSI, DTMF, etc), not sure if its on the older versions or the OS500.

Have you spoken to the guys who look after the huawei switch about how they are presenting cli?

Joined: Apr 2011
Posts: 200
Tariq Offline OP
Member
OP Offline
Member
Joined: Apr 2011
Posts: 200
Dear all ,

as you know that Samsung PABX receive the CLI on first half ring if it comes delayed system does not get the CLI ,i got some information from Huawei people but that is confusing me,i remember when we call via Alkatel switch we hear half ring on caller side but in Hauwei we hear complete ring this is the issue , is there any version difference (i dont thing so becouse i am having this issue in whole area (OS 500, OS 7070,OS 7200 and OS7400 ver 4.46.


Following are the setting i got from Hauwei guy,


At current system PTCL uses
1. sdmf-fsk format
2. clip method set to after ring and
3. ringing timer/pulse duration is set to
for local call no answer for a long time 60 seconds
for National toll no answering for a long time 90 seconds






any idea from any member

Last edited by Tariq; 08/18/12 12:25 AM.
Joined: Jul 2006
Posts: 93
Member
Offline
Member
Joined: Jul 2006
Posts: 93
For PSTN trunks there seem to be very few options on earlier firmware and the format is selected by country - UK CLI (polarity reversal, line seize, V.23 FSK) wasn't supported until v4.30a/b/c, for example.

You could try adjusting CID MSG RECEIVE in SYSTEM TIMERS.

If you connect an analog phone with CLI display to the incoming line does that display correctly?

Joined: Apr 2011
Posts: 200
Tariq Offline OP
Member
OP Offline
Member
Joined: Apr 2011
Posts: 200
yes if i connect analog phone with CLI it shows ok only the thing i discovered that the calling party hear the full ring (Proably becoz of the difference B/W Alkatel and Hawawie switch ring pattern as you can see in my email, point no,. 2 shows clip methd set to after ring (THATS THE ISSUE). I JUST GOT INFORMATION THAT OS7070 IS WORKING OK, now i thing we can see the difference.i will update as soon i get some update . any idea where to check Thanks Tariq

Joined: Apr 2011
Posts: 200
Tariq Offline OP
Member
OP Offline
Member
Joined: Apr 2011
Posts: 200
Dear all after our testing this Cli issue we found that now OS7400 which is having CRM card working ok but OS7400 with RCM(we were using it for only external CLi) is not working + OS500 with RCM2 also not working ,any member have idea? Thanks Tariq

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
The RCM and RCM2 daughter cards were required for PSTN CID on the iDCS500 R1 and R2 (aka OS500). The only difference between them was the RCM2 allowed the PSTN CID to be shown on SLI phones as well as DGP, wheres the RCM was only DGP handsets. We have never been told that the CRM card decodes PSTN CID differently to the RCM(2) card. What version of software is on your OS500?

Joined: Apr 2011
Posts: 200
Tariq Offline OP
Member
OP Offline
Member
Joined: Apr 2011
Posts: 200
Software version is 2.75B (OS500) Thanks Tariq


Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,113 Shoretel
187,717 CTX100 install
186,810 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
pvj 4
Who's Online Now
1 members (JBean3329), 50 guests, and 422 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5