|
|
Joined: Aug 2008
Posts: 58
Member
|
OP
Member
Joined: Aug 2008
Posts: 58 |
I have a customer with 2 merlin magix systems on campus. They would like to tie them together. Could I install t1 cards in each and use 2 patton 2115's connected via overhead and underground copper pair to connect??? Any other equipment needed???? Thanks.
|
|
|
|
|
Joined: Dec 2005
Posts: 9,164 Likes: 8
Spam Hunter
|
|
Spam Hunter
Joined: Dec 2005
Posts: 9,164 Likes: 8 |
Moving topic to the Avaya forum.
I Love FEATURE 00
|
|
|
|
|
Joined: Jan 2004
Posts: 515
RIP Moderator
|
|
RIP Moderator
Joined: Jan 2004
Posts: 515 |
Actually, from a programmer's point of view, this is a fairly easy task. Just make sure that you use a "CLEAR CHANNEL" T1 between them, and then set one Magix up to be "Legend Network" and the other to be "Legend PBX". Of course there's a bit more to it than that, but not much.
RULE NUMBER 2, "THINKIN' WON'T GET IT, YOU GOTTA KNOW!" RULE NUMBER 3, if you need TIER-3 SUPPORT on a LEGEND or MAGIX, go to http://home.comcast.net/~merlinman -
|
|
|
|
|
Joined: Aug 2008
Posts: 58
Member
|
|
OP
Member
Joined: Aug 2008
Posts: 58 |
As a continuation of this topic, if I have 2 pairs of underground/aerial available can I connect the 100 DCD cards together without the Patton extender? Cable length is around 300feet. Looks like the Patton units are about $400 each....
|
|
|
|
|
Joined: Jul 2001
Posts: 3,342 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,342 Likes: 10 |
300 feet is not very far at all, I would certainly try connecting directly first. Just roll Transmit and Receive at one end.
|
|
|
|
|
Joined: Aug 2008
Posts: 58
Member
|
|
OP
Member
Joined: Aug 2008
Posts: 58 |
I've put a 100 DCD card in slot 5, with nothing connected to it. the red light on top is on. When I try to administer the card as Merlin-ntwrk, it does not accept it. I'm using Winspm9. What's wrong??
|
|
|
|
|
Joined: Aug 2008
Posts: 58
Member
|
|
OP
Member
Joined: Aug 2008
Posts: 58 |
I got it. I had to program the LS/GS/DS1 area as PRI first....
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
172
guests, and
353
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
