atcomsystems.ca/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems DX120, PRI, display "no loop current."

Print Thread

Rate Thread

DX120, PRI, display "no loop current." #553513 06/14/13 02:00 PM
Joined: Feb 2007 Posts: 902 Overland Park, Kansas Deltron OP Retired Moderator
OP Deltron Retired Moderator Joined: Feb 2007 Posts: 902 Overland Park, Kansas	How in the world can a PRI display "no loop current" in a DX120? All calls are operating correctly both ways, D-channel has no errors, nothing. It's been running for 5 or 6 years and just started. It clears up on a reset but comes back. Any ideas?

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: DX120, PRI, display "no loop current." Deltron #553519 06/14/13 02:46 PM
Joined: Jan 2005 Posts: 15,378 Likes: 13 Fayetteville, NC EV607797 Moderator-Vertical, Vodavi, 1A2, Outside Wire
EV607797 Moderator-Vertical, Vodavi, 1A2, Outside Wire Joined: Jan 2005 Posts: 15,378 Likes: 13 Fayetteville, NC	I don't know much about the DX120, but is it possible that somehow the B channels are set as loop start? I know that this is a stretch, but.... Ed Vaughn, MBSWWYPBX

Re: DX120, PRI, display "no loop current." Deltron #553526 06/14/13 04:26 PM
Joined: Mar 2001 Posts: 3,268 Mission, TX S. Beloit, IL JWRacedog Moderator-Allworx, Nisuko-Tie, Vodavi
JWRacedog Moderator-Allworx, Nisuko-Tie, Vodavi Joined: Mar 2001 Posts: 3,268 Mission, TX S. Beloit, IL	Are there any programmed line keys that are stuck?? A "9" key that is stuck---programmed to still find a C.O. rather than the PRI? Like Ed---grasping at straws..... Last edited by JWRacedog; 06/14/13 04:28 PM. Rockford VoIP

Re: DX120, PRI, display "no loop current." Deltron #553530 06/14/13 06:44 PM
Joined: Aug 2004 Posts: 9,159 Likes: 16 SOUTH TEXAS RATHER BE FISHING Admin
RATHER BE FISHING Admin Joined: Aug 2004 Posts: 9,159 Likes: 16 SOUTH TEXAS	All sets or just one? Sounds like someone is prime lined to an old line group with no loop start trunks.

Re: DX120, PRI, display "no loop current." Deltron #553533 06/14/13 08:40 PM
Joined: Feb 2007 Posts: 902 Overland Park, Kansas Deltron OP Retired Moderator
OP Deltron Retired Moderator Joined: Feb 2007 Posts: 902 Overland Park, Kansas	Nope, the system is squared with line appearances. Pretty weird.

Re: DX120, PRI, display "no loop current." Deltron #553543 06/15/13 02:37 AM
Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA 5years&counting Moderator-Comdial, ESI, Voicemail, Cisco
5years&counting Moderator-Comdial, ESI, Voicemail, Cisco Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA	Any extra ports in the line group, that shouldn't be there? Justin

Moderated by 5years&counting, jwooten, RATHER BE FISHING

Hop To

Link Copied to Clipboard

Forum Statistics

Forums84

Topics94,287

Posts638,793

Members49,767

Most Online5,661
May 23rd, 2018