|
|
|
|
Joined: May 2013
Posts: 89
Member
|
OP
Member
Joined: May 2013
Posts: 89 |
So this 5220 IP set has been working for a month or so and now display shows "LOCKED OUT". Customer says "I was able to make a test outbound call from the IP phone but the response time for the hang up and other buttons was extremely slow." She says it also won't ring on incoming calls all of a sudden. I have not been to the site, as it is two hours away, and can't verify any of this but the customer is pretty savvy.
This is the only IP set on the system. Any suggestions? Please.
GraniteTCS.com
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
"Locked Out" occurs when a phone has been off hook too long without attempting to make a call. Lifting and releasing the handset (which is usually not on the hookswitch properly) will usually clear this error.
If the user has a headset, with or without a handset lifter, the user may be off-hook without realizing it.
Outside chance: you might have a bad hookswitch. I used to find that on Toshiba phones.
More outside chance: someone's downloading the entire congressional record since 1871, and has the network tied up.
|
|
|
|
Forums84
Topics94,283
Posts638,765
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, Toner),
143
guests, and
237
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
