|
|
Joined: Mar 2007
Posts: 352
Member
|
OP
Member
Joined: Mar 2007
Posts: 352 |
This site has a wren panic alarm for a jewlery site. With the line I assume off hook and active, is it possible to anac a alarm system ?
I was asked by a provider to inventory all the line numbers on the dmaark but was not sure if it is possible on a panic alarm.
Second, is there a test tool that can attach to a Beldon Bix 25 pair punch down and can blink LEDs when the line rings? The reason was I was trying to load the main store pair, and have the hunt group pair ring the butt set but, was not sucsessfull.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Feb 2006
Posts: 1,716
Member
|
Member
Joined: Feb 2006
Posts: 1,716 |
Look for a one shot dialer either at the demarc or with the device that is used for the panic alarm. At one time, direct to the police was the way these lines were installed, however, with budget cuts and staffing problems, most police departments and fire departments have done away with their old monitoring boards in favor of the 911 systems and emergency number dialers.
The correct way to get an inventory is to call the telephone company business office and ask for a customer line report. Short of that, find out from the store management who the panic alarm alerts, call them and notify them of your testing. When finished testing, call them back and notify them that the circuit is not under test.
For LED indicators, visit Sandman. He has them.
Rcaman
Americom, Inc. Where The Art And Science Of Communications Meet
|
|
|
Forums84
Topics94,285
Posts638,781
Members49,766
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
111
guests, and
177
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|