|
|
Joined: Jul 2012
Posts: 129
Member
|
OP
Member
Joined: Jul 2012
Posts: 129 |
It is a MX controller with el cabinets. In form26 I have 911 and 11 set to emergency. When you dial either one it calls out and it prints on a printer hooked up but does not show in logs or on console. What am I missing?
Thanks in Advance
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jul 2012
Posts: 129
Member
|
OP
Member
Joined: Jul 2012
Posts: 129 |
I have to be missing something somewhere. I can not find anything that is turned on or off that would change the fact that 911 does not alarm anywhere or log. In every system I have done you set the digits to be analyzed to emergency and it works.
Thanks in Advance
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
Member
Joined: Aug 2005
Posts: 2,125 |
In form 26*, make sure that the 911 route is flagged as "Emergency" and not as "Local" or "Long."
|
|
|
|
Joined: Apr 2007
Posts: 339
Member
|
Member
Joined: Apr 2007
Posts: 339 |
in cos of console make sure option 102 and 108. As mentioned above form 26 nested and digits 911 must be "emergency" and the digits 911 must go out on the trunk. In the comments field in form 9 type a @ in front of the text you want to display at the console. In maintenance monitor what is actually going out on the trunk.
|
|
|
|
Joined: Sep 2008
Posts: 392
Member
|
Member
Joined: Sep 2008
Posts: 392 |
You also need to have option 616 Alarm Monitor Point in the COS of the console.
|
|
|
|
Joined: Apr 2007
Posts: 339
Member
|
Member
Joined: Apr 2007
Posts: 339 |
Steve, I thought alarm monitor point was for sets not console???
|
|
|
|
Joined: Jul 2012
Posts: 129
Member
|
OP
Member
Joined: Jul 2012
Posts: 129 |
I have it set as Emergency in 26. The option 102 is enable in cos for the console. It is going out on a PRI. It is printing to a printer as 911 call. I know that the trunks are set to send the number of who dialed in form 54.
Thanks in Advance
|
|
|
|
Joined: Apr 2007
Posts: 339
Member
|
Member
Joined: Apr 2007
Posts: 339 |
you have options 102 and 108 enabled in the cos of the console, console cos in form 7?
|
|
|
|
Joined: Jul 2012
Posts: 129
Member
|
OP
Member
Joined: Jul 2012
Posts: 129 |
I have 102 enabled they do not want the audible alarm. This should not matter I have other properties that only have 102 and it is fine. yes it is for the console cos.
Thanks in Advance
|
|
|
|
Joined: Apr 2007
Posts: 339
Member
|
Member
Joined: Apr 2007
Posts: 339 |
in form 26 check what route the 911 call goes out and then what do you have in form 22 for the modified digits for that route
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, justbill),
168
guests, and
234
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|