|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
I used to have a file with every programming option, and what it was programmed for, for a BCM 400. I don't know what happened to the file and I don't know what it's called, nor where to find it in the BCM. It would be very helpful if I had to re-pack a program from scratch, after a disaster, for example.
I would like to save this file for the BCM's that I currently support, especially a 450. Can anyone point me in the right direction.
Thank you. Jim
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Aug 2004
Posts: 1,630 Likes: 29
Admin
|
Admin
Joined: Aug 2004
Posts: 1,630 Likes: 29 |
I'm guessing it was buried in the Reports/Debug section of the web interface for 3.7 BCM's. If so, you'd probably have to retrieve it from the Linux command line on a 450 (if it still exists)
Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
Is the choice not on the top of EM under one of the header choices?
|
|
|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
There it is! Under the Windows menues (File, Edit, etc.), called Sessions. I looked in the EM menues, don't know why I didn't look here. (Same thing happens at home, just ask my wife.)
Thanks CurlyCord.
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
148
guests, and
352
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|