web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Apr 2007
Posts: 1,439
doghart Offline OP
Member
****
OP Offline
Member
****
Joined: Apr 2007
Posts: 1,439
I have multiple sites running different builds of 14.2 across the state. They are not linked together in any way.

What happens is the phone will stop taking workgroup calls. It behaves as if it is busy. Calls queue or overflow depending on how the work group is configured. Calls directly to the phone extension or DID calls ring and behave normally, but workgroup calls just will not ring on the phone.

I unplugged the phones, plugged back in, same issue.

Replaced phone with a different IP230 or 565 and the phone will now ring. A few weeks later, same issue occurs.

Verified the firmware version is correct, phone behaved normally for months before the issue occurs.

I discovered re-booting the phone from the diagnostic tool will get the phone ringing again.

Until i figured that out, i was replacing the phones with IP485G phones which seemed to cure the problem.

Anyone seen this before?

builds 19.45.8701 and 19.44.1602 are at two of the sites.

thanks

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2005
Posts: 2,702
Likes: 7
Member
Offline
Member
Joined: Jun 2005
Posts: 2,702
Likes: 7
I had an issue with an early build of 14.2 where the Workgroup agents would be on permanent wrap-up and never receive a call. Looking at my email messages, it looks like this was fixed in build 19.42.6503.0.

The Call Communicator did not show anything was wrong with the agent. I ran the workgroup CLI tool to see that the agents were in wrap-up.

But as soon as one issue was fixed with an upgrade, another issue came up. Right after the upgrade the voicemail escalations stopped working.

You may have to check the Shoretel release notes to see if this issue was already fixed in a later build.

Searching through the Fixed issues I found:
Known issues fixed in ShoreTel 14.2 build 19.46.7601.0:
ENG-368800 Calls to workgroup agent cannot be answered

Known issues fixed in ShoreTel 14.2 build 19.45.8701.0:
ENG-327956 Workgroup Agent's phones when logged in are not getting calls
ENG-252141 Workgroup Agent goes unavailable for Workgroup calls even though they are idle
Known issues fixed in ShoreTel 14.2 build 19.44.2503.0:
ENG-180322 Unable to answer Workgroup calls






Joined: Apr 2007
Posts: 1,439
doghart Offline OP
Member
****
OP Offline
Member
****
Joined: Apr 2007
Posts: 1,439
Thanks for the KB info!
I have also discovered that restarting the work-group service corrects the issue as well.

Looks like I have another round of upgrades to do. smirk

D


Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,710 CTX100 install
186,795 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
2 members (Professor Shadow, pvj), 168 guests, and 246 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5