web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#601861 06/24/16 05:46 AM
Joined: Mar 2012
Posts: 140
Member
OP Offline
Member
Joined: Mar 2012
Posts: 140
Customer connected new 2N IP doorphone to OS7200 v4.80 and have problems with DTMF tones for opening the door.

It's working from Samsung IP phones, but not working from DLI and dect (analog) ports.

We use MGI16 card, MPS function is off. Have tried setting dtmf type to RFC2833 but still not working.

Another strange issue is, if the doorphone calls an analog extension, it does not reccognise OnHook, and stays somehow in use. I have to clear the call manually in 6.3.5 Port clear.

Any ideas?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
I have one of these installed at a site with only SMT phones and it works well.

I remember there are a lot of options in the door phone.

MPS will have no bearing on digital handsets at all (or your site at all since you have a MGI16 (unless it's a OS7100))

Check you MGI settings for the DTMF type.
Check the SIP station settings for the DTMF type, and make sure they all match what you have configured in the door phone itself.

Joined: Mar 2012
Posts: 140
Member
OP Offline
Member
Joined: Mar 2012
Posts: 140
I think I found the solution - DTMF type must be set in 2.1.5 System Options and NOT in 5.2.16 MGI Options (under MGI3 - this does not affect MGI16 card).

The other setting is in SIP Phone Information 2.7.2

In system options I've set DTMF type to Inband(In Voice), in SIP Phone Information I've set DTMF type to RFC2833.

I have to check if the other issue is still present (SIP doorphone not disconnecting the call).

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
The settings must match in the SIP phone config in the system and on the phone.

Those 2 options are for VoIP trunks, not for sip extensions.

MGI3 is for the original OS7000 MGI card (and possibly the onboard MGI for old software)
MGI6 is for the MGI16

The DTMF type shouldn't have any bearing on call disconnection, sounds like it's not detecting busy tone.


Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,096 Shoretel
187,701 CTX100 install
186,789 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
0 members (), 114 guests, and 83 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5