|
|
Joined: Sep 2004
Posts: 75
Member
|
OP
Member
Joined: Sep 2004
Posts: 75 |
Customer has qty 4 existing m7316e's program just fine. He had ordered 4 more phones appear to be t7316e however system thinks they are 10 button phones.. There for i can not make programing uniform between all 8 phones. Ive programed and copied system and user data to all extensions still no dice.. are these aftermarket phones? or the truth? am i stupid? thank you in advance [email protected]
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2006
Posts: 8,732 Likes: 2
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,732 Likes: 2 |
No such thing as "M7316e" phones. Either T7316e's, T7316's, or M7310's.
Depending on what you're trying to copy, it may or may not be possible.
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Sep 2004
Posts: 75
Member
|
|
OP
Member
Joined: Sep 2004
Posts: 75 |
yes my bad T7316e.
the new ones physically appear to be same
if i try to program extension of a new phone it thinks it is a m7310 it tells me this when go to manual button programing on actual extension.
tells me t7316e on original phones but not on new..
|
|
|
|
|
Joined: Sep 2004
Posts: 75
Member
|
|
OP
Member
Joined: Sep 2004
Posts: 75 |
if i tell it a line 1 to appear and ring on orignal phones it appears on top left
if i tell a new phone same thins it appears 4th down on left on new phone
am i missing a setting?
|
|
|
|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
|
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
What version software? I think you need a newer version in order for the T7316e's to be recognized as such.
Jim
|
|
|
|
|
Joined: Sep 2004
Posts: 75
Member
|
|
OP
Member
Joined: Sep 2004
Posts: 75 |
will have to wait to check software version. not in front of it ATM
but why would it recognize 4 existing as t7316e's but not new ones?
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Look for the buttons under the Volume Rocker button.
If you have THREE buttons, it is a T7316e phone.
If you have TWO buttons, it is a T7316 Phone. NO e
The NO-e phone only the bottom 5 buttons on each side can be programmed with line buttons.
Also if you have software less than 6.1 the "e" phones will also act like a M7310 phone - only the 5 bottom on each side can have line buttons. It will program like a M7310 phone.
You seem to say that the original phones you can program ok then you probably have 6.1 or 7.x version software. Which is OK.
Check for how many little buttons below the Volume rocker switch.
If someone ORDERED a "e" phone it sounds like they sent you a "no-e" phone.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Sep 2004
Posts: 75
Member
|
|
OP
Member
Joined: Sep 2004
Posts: 75 |
That would fit my issue.
thank you very very much for that explanation.
|
|
|
|
Forums84
Topics94,287
Posts638,784
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (hbiss),
127
guests, and
174
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
