Previous Thread
Next Thread
Print Thread
Rate This Thread
#611508 - 07/26/17 02:59 AM NEC SL 1100 with IVR  
Joined: Oct 2005
Posts: 63
Motohead Offline
Member
Motohead  Offline
Member

Joined: Oct 2005
Posts: 63
St. Louis MO
Hi all I'm new to the NEC world been a Toshiba guy for forever and have moved to the NEC product. I have a small pharmacy with an omega system that has failed and I am replacing it with an SL 1100
the pharmacy has an IVR system that connected to analog ports on the omega and acts as a front end auto attendant. For 0 operator calls I created a virtual extension (250) and placed the key on each phone I can dial 250 it rings all phones i can transfer answered calls from the analog ports using flash 250. so the operator calls will work with some reprogramming to the IVR I have set each line in its own group and set each IVR port to a single line group for inbound answering this will work as they only have 3 inbound lines but its a little sloppy. How would I create a distributed hunt group using analog ports 109-112 (IVR) and then ring all the lines to that group.

NEC Telephone Equipment Search
#611513 - 07/26/17 12:56 PM Re: NEC SL 1100 with IVR [Re: Motohead]  
Joined: Apr 2005
Posts: 2,044
dans Offline
Member
dans  Offline
Member
*****

Joined: Apr 2005
Posts: 2,044
St. Louis, Mo 63025
What is the purpose of the IVR system? Does the SL1100 have the InMail?


We get old too soon, smart too late
#611514 - 07/26/17 12:59 PM Re: NEC SL 1100 with IVR [Re: Motohead]  
Joined: Mar 2014
Posts: 247
helpifican Offline
Member
helpifican  Offline
Member

Joined: Mar 2014
Posts: 247
NC
Department groups offer a form of hunting, priority or circular. They just cannot be forwarded to VM, but I think your IVR ports don't need that.
You can probably set up a similar operation using the inmail and retire their IVR.

#611527 - 07/26/17 08:08 PM Re: NEC SL 1100 with IVR [Re: helpifican]  
Joined: Sep 2004
Posts: 3,494
Coral Tech Offline
Member
Coral Tech  Offline
Member
*****

Joined: Sep 2004
Posts: 3,494
Chicago area, Illinois
Originally Posted by helpifican
Department groups offer a form of hunting, priority or circular. They just cannot be forwarded to VM, but I think your IVR ports don't need that.
You can probably set up a similar operation using the inmail and retire their IVR.


Pretty much this. Unless the IVR is actually doing IVR stuff. The analog ports going to the IVR cannot have ANY fwd features set to work but that's really a non issue. Be better to use the inmail as primary AA and if they need access to the IVR you can dial out the inmail.

#611561 - 07/27/17 04:41 PM Re: NEC SL 1100 with IVR [Re: dans]  
Joined: Oct 2005
Posts: 63
Motohead Offline
Member
Motohead  Offline
Member

Joined: Oct 2005
Posts: 63
St. Louis MO
the IVR is tied into their refill database and no inmail. I worked with Sotel tech support and got it working according to them their is an issue with the SL1100 and some programs needing a login-logout after uploaded from PC Pro for the program changes to take effect. so we were able to create a department group with the IVR ports then I created another department group containing all the phones set the pilot number to 81 (which is what the IVR was programmed to transfer to on dial 0 ) and it all appears to work. As I was cleaning up though I noticed the blue light on the KSU had changed its behavior, it is now blinking blue 3 times pausing red 1 time and repeating. Does anyone know what that means?

#611576 - 07/27/17 06:56 PM Re: NEC SL 1100 with IVR [Re: Motohead]  
Joined: Mar 2014
Posts: 247
helpifican Offline
Member
helpifican  Offline
Member

Joined: Mar 2014
Posts: 247
NC
The red LED is an alarm. The easiest way to read them is to log in with WEBPro.

#611653 - 07/31/17 03:46 PM Re: NEC SL 1100 with IVR [Re: helpifican]  
Joined: Aug 2005
Posts: 555
Toolie Offline
Member
Toolie  Offline
Member

Joined: Aug 2005
Posts: 555
Wadena, MN USA
I wouldn't get too concerned about the alarm LED on the SL1100. As long as things work. I have about half the installs of those I have done showing alarm status - but there is no alarm code for that particular sequence. I asked NEC about it and basically got a shoulder shrug and a "don't worry about it."

#611657 - 07/31/17 04:32 PM Re: NEC SL 1100 with IVR [Re: Toolie]  
Joined: Dec 2014
Posts: 6
seafort Online content
Member
seafort  Online Content
Member

Joined: Dec 2014
Posts: 6
BC, Canada
99% of the time that I've seen the alarm light flashing it matches back to a power up/down alarm. Like duh, I programmed the system in the office and installed on-site, of course it's been power cycled. Sometimes I care enough to clear the alarm, but power around here tends to be flaky.


Ex-Norstar, ex-Definity, current NEC/Zultys/Hosted/sometime-IPOffice, wait, what? another damn system? kill me now.
#611669 - 08/01/17 12:45 PM Re: NEC SL 1100 with IVR [Re: Motohead]  
Joined: Apr 2005
Posts: 2,044
dans Offline
Member
dans  Offline
Member
*****

Joined: Apr 2005
Posts: 2,044
St. Louis, Mo 63025
To clear the alarm go into programming via phone, enter program 90-53-01


We get old too soon, smart too late
#611686 - 08/01/17 09:56 PM Re: NEC SL 1100 with IVR [Re: Motohead]  
Joined: Jul 2005
Posts: 1,303
paulw Offline
Member
paulw  Offline
Member
*****

Joined: Jul 2005
Posts: 1,303
Auckland , New Zealand

Last edited by paulw; 08/01/17 09:56 PM.

Regards,

Paul W
Now back to a 3 day week. Love these 4 day weekends.
#613241 - 10/12/17 08:03 PM Re: NEC SL 1100 with IVR [Re: paulw]  
Joined: Dec 2016
Posts: 21
DMontgomery Offline
Member
DMontgomery  Offline
Member

Joined: Dec 2016
Posts: 21
Indiana
Would you mind uploading the alarm codes again? The link is broken.

#613381 - 10/17/17 10:19 PM Re: NEC SL 1100 with IVR [Re: Motohead]  
Joined: Jul 2005
Posts: 1,303
paulw Offline
Member
paulw  Offline
Member
*****

Joined: Jul 2005
Posts: 1,303
Auckland , New Zealand
Try this one as Dropbox changed their links system a couple of months ago and old links vanished
https://www.dropbox.com/s/uxxdlou0zzt71kx/SL1100%20%20LED%20Alarms.pdf?dl=0


Regards,

Paul W
Now back to a 3 day week. Love these 4 day weekends.
#613402 - 10/18/17 05:51 PM Re: NEC SL 1100 with IVR [Re: DMontgomery]  
Joined: Mar 2017
Posts: 8
phonetroll Online content
Member
phonetroll  Online Content
Member

Joined: Mar 2017
Posts: 8
Ca
This might help you? The Hardware Manual has a list of "LED Indications" on page 196. I'm not an SL1100 guy so maybe someone can confirm?

http://www.cleartelecommunications.com/documentation/NEC/SL1100/SL1100-Hardware-v6.pdf



Moderated by  DrPbx, ttech 

Refurbished Phones & Equipment Search
TARGETED LEADS Telephone Installers, System Installation & Phone System Sales!
Technician Search, enter State or Zip Code
Shout Box
FREE DESI Labeling System Software!
FREE DESI Labeling Software - Click Here!
Most Recent 5 Post
uMobility SL1100
by teldata1. 10/20/17 12:12 AM
Intercom on SX-200 AX Analog Port
by westerntelephone. 10/19/17 10:32 PM
Single Drop OSP
by dexman. 10/19/17 06:41 PM
SV9100 - Cloud dialler setup
by ecohomes. 10/19/17 04:14 PM
Who's Online Now
34 registered members (dexman, Yoda, MooreTel, newtecky, metelcom, mongo5150, hbiss, teldata1, Carlos#1, jeffmoss26, Touch Tone Tommy, phonman123, jb-alert@live.com, justbill, DND ON, mbhydro, ChrisRR, phonetroll, C5Z, Arthur P. Bloom, Keyset6, ahartsell, westerntelephone, Scotty Woods, John807, Silversam, seafort, OBT, ATechguy, Ironhedz, Johnny Luchador, Ohm_Boy, 2 invisible), 432 guests, and 520 spiders.
Key: Admin, Global Mod, Mod
Tech Support Line 1.800.766.3425
Over the Phone Tech Support for your Phones and Business Phone Systems
Popular Topics(Views)
Newest Members
KHOD, celeste, John-Bee, CAMBRIDGEDENTAL, Jone2017
48284 Registered Users
Forum Statistics
Forums60
Topics89,824
Posts612,723
Members48,285
Most Online4,713
Apr 2nd, 2014
Today's Birthdays
Derbinator, Hound, Jaybroni, Tekamba
Top Posters(30 Days)
dexman 58
John807 18
oobie 14
RedBul 13
Free Voip phone with every line!
FREE Voip Phone - Click Here!
Ad Spot for sale $299 This spot gets 5 million page loads per month! Call 1-800-766-3425
Free Phone Repair Diagnostic
Website for sale!
Business and website or sale!
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
ęCopyright Sundance Communications 1998-2016




Trusted Partners
Sitemap