MLX 10D Wiring|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

MLX 10D Wiring #69920 06/04/03 07:40 AM
Joined: Jun 2003 Posts: 2 amikkawi OP Member
OP amikkawi Member Joined: Jun 2003 Posts: 2	Dear All, I am working on an application for the Avaya Merlin MagiX. I need to know the wiring scheme of the MLX 10D. I mean how are the 4-wires connected between the PBX and the handset.

Avaya IP Office Help & Support Website

Avaya IP Office Help & Support Website

FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Re: MLX 10D Wiring #69921 06/04/03 08:04 AM
Anonymous Unregistered
Anonymous Unregistered	Quote <font face="Verdana, Arial" size="2">Originally posted by amikkawi: Dear All, I am working on an application for the Avaya Merlin MagiX. I need to know the wiring scheme of the MLX 10D. I mean how are the 4-wires connected between the PBX and the handset.</font> Easy, 4 Pair IWC (inside 4 Pr) from enduser to control unit, cut down a mod plug, and plug into spare MLX port, use all 4 pairs, Then program.

Re: MLX 10D Wiring #69922 06/04/03 08:08 AM
Joined: Jun 2003 Posts: 2 amikkawi OP Member
OP amikkawi Member Joined: Jun 2003 Posts: 2	To be more specific, I meant, I want to know what does each wire do and connected where? I heared something about PBX pair and handset pair...I need some information

Re: MLX 10D Wiring #69923 06/04/03 12:18 PM
Joined: Nov 2002 Posts: 13 baltimore & new jersey getwiredbymitch Member
getwiredbymitch Member Joined: Nov 2002 Posts: 13 baltimore & new jersey	you should call an experienced telecom vendor if you arent sure of this system. Thats what we all are in business for....

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems MLX 10D Wiring