Anybody up here who might know the correct pin out for an ADTRAN 600R total access router to access the craft port. None of the cables I have will work and I noticed the manual indicates the cable is "proprietary". Of course they didn't send one with the unit, how nice.
Any help would be appreciated, Thanks!
if you take an old Cisco console adapter, green (remove red wire) 2, 3 black, 5 Blue. straight thru patch cord. Is what I have used sucessfully. If you are using a usb to serial adapter good luck, Adtran won't support that.
https://www.adtran.com/adtranpx/Doc/0/Q3VHPK09LRR4DA89R4S8PUDR64/DB9-RJ45_Pinouts.htm
You wouldn't happen to know the DB-9 to RJ-45 pin to pin assignments. I'm stuck out on the road with not much to go on except my cable making kit.
The link is dead, does anyone have the pinout? I have an old 616 and for the life of me I can't get into it.
Hi Justin,
Given that this topic is about 7 years old, the broken link doesn't surprise me. Generally, we suggest starting a new topic rather than tacking onto an old one.
I 'm not familiar with ADTRAN's website. If it offers a search
function, give it a whirl and see if it returns any matches.
And with that info I'm locking this topic.