I posted this under the general tab as well, but thought it would be useful here as well. DST will begin earlier and end later this year for anyone who needs to observe it. It will begin the second Sunday in March and end the first Sunday in November beginning this year.

Toshiba issued a list of those systems that will need to be updated via a program chane or a software update. On the PBX side, it is a program change if the system is a CTX (running MH227 or higher software) or any CIX system. DOS based VM units running 3.3 software or higher as well as all ES VM's will need to be updated. Updaes are available to authorized dealers with access to The FYI website.

They do not recommend doing a remote update ont he VM units as a reboot is required once the update is complete.

My software is "CTX100 AR3.10 MK043.00"
Would I need an update?

Thanks.

You can manually change the dates on a CTX or CIX.

Many installs I've seen still have it off (default). As noted you need ver 2.22MH227 or higher.

Ringtone - on the CTX side, you will need to manually change the information found under System-Daylight Savings. Once you change it there, you wouldn't need to do it again. Teh softwae updates are for the VM only. You will need to update your admin software prior to uploading the updates as the updates are bundled in with the new admin. Make sense?

I figured out where to update the daylight savings time information. I believe it was prog code 121.

Thanks for the info.

- John

Welcome