Help,
red light wont stop flashing
there is no messages----
display says :
MSG >>> PETE ext 108

fyi
no manual

Here is a link to the user guide:

https://www.necunifiedsolutions.com/Downloads/PDFs/UserGuides/ND91712_2400IPX_Dterm_i_IP_UG.pdf

It appears that someone (PETE at Ext 108) accidently pressed the MSG key [message key] when the call was not answered and this left the display to notify the user of the extension that PETE called while they were out.

Pages 69-70 is were the information is.
Hope this helps.

Your Kind thank
Cannot keep an PDF open at this desk maybe i can try to read this fromhome pc
was hoping for a quick fix = feature 123 or sumtin
thank you tho for your response :bang:

TO ERASE
To erase a message without returning the call, press MSG to display desired message.

Dial # or * while message displays. Message is erased.

Note: If station that left message is busy, callback or MSG may be set. If station
that left message does not answer, MSG may be set, notifying originating
party that a message return was attempted.

User's Guide's are usually easier to thumb through as a hard copy as opposed to reading a .pdf file. Even if it is 98 pages it's worth the investment to have a copy around.

Dean

Dean,

The link you posted doesn't exist anymore. I searched NEC's website but can't find any hits on a Dterm 80. What I need to do is program speed dials. Can you help?

Try this site:

https://phone.manualsonline.com/ex/thread/view/idThread/2528587

I just "Googled" and found this page...What system is the phone attached to?