We just set up our new Electra Elite IPK II with Dterm 80 phones. According to the manual, you should press "Speaker" then "751" then the key you want to program, then the code (41 for buzzer?) then "Speaker" to hang up. This doesn't seem to work.

How do you program the phone for one-button push intercom use? We want to set them to automatically dial intercom extensions throughout the office.

THANKS FOR YOUR ASSISTANCE!

First press the Feature key and then the button to be programmed.
This will show what is programmed on that button.

The button to be programmed needs to be blanked first. To blank a button dial 752 then the button then dial 000 to clear it.

For DSS buttons dial 751, button to programmed, dial 01, then dial extension number.

I always use is the Reverse Voice over key, dial 751, then button, dial 47 then dial extension number.
With reverse voice over you can call the extension without putting the call on hold first, of course to have the extension reply they need a voice over key.


DJ

Thank you very much for the feedback. This worked!