Hi, i try to figure out how to implant disa in sv8100 as all trunk are sip and are set as DIL. Do i have to change a set a trunk as DISA or can i set up an action inside the inmail auto attendant that router the caller to the DISA?

Hi haven't any idea right now how i will do that.

Any help ??

Why don't you have the SIP lines setup as DID?

At first, my customer has analogues lines and the system has been setup this way.

Ok, I am confused. Are they SIP or POTS?

I don't see how SIP trunks would work if they are setup as DIL

As far as i know, my customer has 1 sip line with 4 channels, and by now all the trunks are set as DIL and he can receive and make outside call. Maybe it's not the way it should have work, but it work right now. As it have only one DID, is it right for me to change the trunk to DID? and if i have to set a trunk as DISA, how the system know that he have to select that trunk when i have only 1 sip line with 4 channel?

I suppose a better question is what is your application? What are you trying to do with DISA?

My customer want to be able to, from his cell phone or at home, Calling his phone system and, with the DISA feature, make an outside call without paying add long distance fee.

See if your customer can order some DID numbers from their SIP provider, cost should be minimal. Using one of the DID's you can setup mobile extension

Thank, so if my boss order an order DID from our sip provider, i need to set up the trunks in DID, and make a mobile extension who use the new DID to make outside call?