How do I get transfered in remotely with alternate dialing on?
Is it 2nd Trf 9# from the op console or is it something different?
How do I have a user from say, a M32 do it?

second transfer 99 should work.

Good Luck!!

Could not make it work. They dial 9 for an outside line themselves. I could only get the modem trf to work by turning off alternate dialing and after the transfer turning it back on. It doesn't come up very often, I'm mostly just wondering.

Make sure you have second transfer turned on in the M screen.

if you have a spare analogue port put it in a hunt group loop it into a spare co port and assign the trunk type as a modem. then you will have your customer transfer you to that hunt group.

trans/con 99 should work from a m32

trans/con 99 won't work if alternate dialing is activated, the system will give the person trying to transfer the call to the system modem central office dialtone.