dear all,
we are having one site of flexicom 5000
with ver 11.10.15 now we wants to upgrde version to 15.58 for this operation should i need to reprogramming the system since iam replacing MEXIP TO MEXIP2 ,PLEASE LET ME KNOW FROM BINARY BACK UP OF OLD VER (DATA FILES )CAN BE DOWNLOADED TO LATEST VERSION

THANK YOU VERY MUCH IN ADVANCE
PARTHA
INDIA sgparthasarathy@gmail.com

Upgrade via loading binary should work.
Why new version? Why 15.58?

Hi. I think you will have to use FMProg and Compose new software with old Ver 11 database....

LarryMac is correct.

Yep, both ways will work

1, I WANTS TO START FXS (IP PHONES)WHICH WAS NOT SUPPORTED BY THIS VERSION (11.10.15)AND MEXIP CARD
SO WE PURCHASED MEXIP2 FROM TADIRAN SO RUNNING MEXIP KEPT AS SIDE :toast:

2, DUE URGENT I REPROGRAMMED TOTAL SYSTEM IT TOOK 3 HOURS

3, PLEASE LET ME KNOW WHAT IS FM PROGRAM WHERE I WILL GET THIS SOFTWARE
THANK YOU VERY MUCH FOR YOURS REPLY
PARTHA
INDIA

FM Prog is a proprietary program Tadiran developed for their Operating system on the Tadiran systems. The only place you can get it is from Tadiran. Once you get the software and install it, you will have to call Tadiran and give them a machine ID that is generated during the installation of the program.

Thank you very much