When recording the system OGM, my user is hitting the center button to start and stop the recording and that works fine but there is a long delay when that message is played until the caller hears a beep.

I've tried hitting # and then the center button to stop but that doesn't seem to do anything.

Also, they have Platinum phones and ALL the displays are so dim you can barely see them. Does anyone have a solution for this>

Thanks, Bracha

Never noticed your 1st problem, but apparently the solution for your 2nd from XBlue is to buy new phones....

Have a X-16 system with 2 of the 3 phones with screens as you describe. At least with Nortel phones if the screens screw up you can change them without buying a new phone...

I can't sell any more X-16s knowing the screen goes to nothing.

I now advise setting the LCD back light to off in phone programming. That way it only comes on when the phone is active and should add years to the lighted screen. I just replaced 2 phones because of this and now I can check back in and report on this topic in 2 more years!