Anyone know how to log into one of these units to change settings? I can get the IP address from the built in IVR menu but when I browse to the IP address its just a statistical page and nothing can be changed.

Thank you in advance,
Gary

Take a look at this: https://www.cisco.com/c/en/us/td/do...sh/administration/guide/sip/187adm80.pdf

Perhaps you could try resetting it to factory defaults?

Another thing you could try is reloading the firmware:

https://www.cisco.com/web/software/282074215/51623/cmterm-ata187-9-2-1-0-readme.html

Scott

bumping an old thread.

After the IP address put a /dev that should allow you to change options on the ATA