Hi,

I need some help connecting a 100 to a mics 7.0.
I was only supposed to move the system and do some data wiring. The customer got the idea of adding vm while we do the move. Ordered it on line and handed it to me to install tomorrow.

Any help would be appreciated.

Cory

Select two ports to connect it to and you are set. Once the CP sees the ports it should sync. Once it sees the MICS you can program it via set or GUI.

If you've never install a VM on Nortel, you're in over your head.

If you have, it's almost like a flash, takes 2 ports (DN's). I usually install on the last 2 two in sequence.

If you need more detailed info, we can always move this to the Installer's forum.