atcomsystems.ca/forum
Greetings,
I have an MICS with a two port fibre card with one 12x0 and one 0x16. We need to add another 0X16. To keep the numbering plan correct how should the modules be reconnected to the 6 port card?
TIA
Normally Stations start at the bottom and Trunks start at the top on 2 or 6 port cards (exception with a 2nd 6 port)
Bottom would be port 301-316 and top Lines 073-096

You can look at the Installer guide to see the entire numbering plan.

© Sundance Phone System Forums - VOIP & Cloud Phone Help