[Germany] KX-TD1232 and ISDN-Fax - 02/02/07 04:43 AM
Hi,
I'm in a little trouble because my boss told me to install a ISDN-Fax at our Pansonic KX-TD 1232 telephonesystem. The problem is that I don't know how.
It is a Panasonic KX-TD 1232 with adapted modul for 4SO-Lines (KX-TD 281) and a ISDN-2SO digital super hybrid system (TD- 290?) plugged at the front in the bottomm slot.
I tried some configuration and wiring kombinations given in the manual, but nothing worked.
Does anybody know how to plug/wire and config the system to get the fax working?
Here the things I tried yet:
Wiring at the 281: from bottom to top red, blue. white, yellow (should be 1b, 1a, 2b, 2a) and wired the fax according to this combination.
At the phone:
Systemprogram -> [450] 30 Y-NN (was given in the manual for our config.)
settings in [109] remained default/factory settings: C;C;E1;E2
After a reboot and a short waiting time none of the internal phones worked.
Is there a specific configuration and wiring so that it's possible to get an internal ISDN-Line that has its own MSN?
Another problem is our internal door opening system. We have two wires coming from the door which have to be coonnected to activate the opener.
The system has 5 plugs (two upper and three lower) with 4 pins - I tried every combination and the internal numbers 551 and 671 for door opener and external relais - but nothing seems to happen.
Thank you very much
Wex
I'm in a little trouble because my boss told me to install a ISDN-Fax at our Pansonic KX-TD 1232 telephonesystem. The problem is that I don't know how.
It is a Panasonic KX-TD 1232 with adapted modul for 4SO-Lines (KX-TD 281) and a ISDN-2SO digital super hybrid system (TD- 290?) plugged at the front in the bottomm slot.
I tried some configuration and wiring kombinations given in the manual, but nothing worked.
Does anybody know how to plug/wire and config the system to get the fax working?
Here the things I tried yet:
Wiring at the 281: from bottom to top red, blue. white, yellow (should be 1b, 1a, 2b, 2a) and wired the fax according to this combination.
At the phone:
Systemprogram -> [450] 30 Y-NN (was given in the manual for our config.)
settings in [109] remained default/factory settings: C;C;E1;E2
After a reboot and a short waiting time none of the internal phones worked.
Is there a specific configuration and wiring so that it's possible to get an internal ISDN-Line that has its own MSN?
Another problem is our internal door opening system. We have two wires coming from the door which have to be coonnected to activate the opener.
The system has 5 plugs (two upper and three lower) with 4 pins - I tried every combination and the internal numbers 551 and 671 for door opener and external relais - but nothing seems to happen.
Thank you very much
Wex