What part #'s are required to get 10 cordless phones going.
This is for internal use only, no lines or vmail required.
They just want to intercom each other.
Warehouse so base stations would be required.
Thanks
tda 50 with 8 port cell station
The Canadian version is TDA 30. You looking for part numbers for the cards and wireless handsets and access points?
Thanks
The tda 30 is gone here, I would use the ncp500 with 2 channel dect cells. The parts and amount depends on size of building you are tring to cover (how many cell stations)
Curlycord,
Are you looking to get a true wireless system or just something that can handle 10 plain old cordless phones?
Looking for parts compatible.
They want the cordless system to run independent of the Norstar in place....the wireless is solely for internal calling only and does not need to be attached to the KSU or outside lines or twinned etc.
I gave them some solutions so far like Engenuis, Companion (we still support it) and AT&T's Synj.
I thought of adding Panasonic as a quote too.
Place is about 200' X 200'.
Thanks
you could be in trouble with cell stations being too close if you wanted more than 2 mobiles to talk to each other with-in a 200 x 200 foot area or else put in a 8 ch IP cell on a NCP