Hunt Groups|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Hunt Groups #123494 05/10/05 05:14 AM
Joined: May 2005 Posts: 6 San Jose, CA, USA dmice OP Member
OP dmice Member Joined: May 2005 Posts: 6 San Jose, CA, USA	Hello, I have a question about Hunt Groups. I am using ICS 4.0. I am able to program hunt groups and am able to use them, but when I do, my programming for buttons b01, b02... changes to the hunt groups that I program. Is there a way around this? I would like to have b01 to be DND and if the Hunt group has to be assigned to a button, have it assigned to a different button. Any advice is appreciated. Thanks

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
Hunt Groups	dmice	05/10/05 09:14 AM
Re: Hunt Groups	BCMguy.com	05/10/05 12:12 PM
Re: Hunt Groups	dmice	05/12/05 07:42 AM
Re: Hunt Groups	emmitt2727	05/13/05 06:24 AM
Re: Hunt Groups	dmice	05/13/05 07:07 AM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Hunt Groups