|
|
Joined: May 2005
Posts: 22
Member
|
OP
Member
Joined: May 2005
Posts: 22 |
MICS4.1
VMAIL ringing service is set to "Auto", all other services set to "Off". I changed the control set for all lines/sets from DN 228 to DN 229. DN 229 now displays the "Services ON" message when VMAIL is active.
The strange thing is that DN 228 momentarily beeps "Access Denied" the moment VMAIL ringing begins. What's also interesting is that when you exit out of a programming session on DN 228, about 3 seconds later you get the same "Access Denied" on the display for a moment. This only happens while VMAIL ringing is engaged...during normal hours no such message appears.
I have checked & double-checked to be sure that DN 228 is not assigned as a control set anywhere - where else can I look?
Thanks for any input.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
123
guests, and
342
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|