|
|
Joined: Jun 2006
Posts: 8,732 Likes: 2
Moderator-Nortel, Computers, General
|
OP
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,732 Likes: 2 |
I installed a Compact 6x16 Friday with a CLID C6 unit.
It's configured (as they requested) that Line 1 show on set 21, Line on set 22, and Line 3 on set 23.
Lines 1 & 2 are no problem, and I'm positive that I verified Line 3 as well on Friday, however they called this am & reported no CLID on Line 3.
When I get there, I verified the report, checked the programming and all good.
Then I call into Line 3 from my cell. In lieu of it showing my cell # it shows "xxx-xxx-xxxx Calling", where xxx-xxx-xxxxx is THEIR Line number.
I rechecked the programming and it looks good so I decided to remove the programming for that set and try F811. Still shows the same thing.
Changed out the CII and still the same.
I didn't have the time today, being Monday & too many other repair calls to deal with, so I'm heading back tomorrow.
Any ideas? I'll start by changing the set, then the KSU & S/W if need be, but other than that ?????
Dave
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons". Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,287
Posts638,785
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
1 members (JBean3329),
137
guests, and
159
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|