|
|
Joined: Dec 2007
Posts: 14
Member
|
OP
Member
Joined: Dec 2007
Posts: 14 |
I have a client that wants DID service, unforunately he has a CICS, so I will be upgrading him to a MICS with a trunk module and a DID trunk card.
Presently, he only needs 4 DID numbers set-up to ring into the system, but they will be adding additional DID numbers later on.
I will order the DID numbers from AT&T (minimum block of 20 DID #'s).
What programs will I need to set-up? (ie: Target lines, assigning target line to DN, mappng DID numbers to target lines, etc.)
My CD doesn't go into very much detail on DID set-up.
I plan on starting out with a simple set-up: (1) trunk module and (1) DID card.
Any assistance or advise would be greatly appreciated.
Thanks,
Smittydog
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,284
Posts638,773
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
2 members (BobRobert, Yoda),
162
guests, and
169
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|