This is a new one...I just set up a new MICS (7.1) w/PRI. Set public DN lengths appropriately (DN length = 10 for local calls, 11 = long-distance & 3 = 411/911). Absorb length "All". Dial "9" to get out. All outbound calls are working fine.

However, when I attempt to dial 411 I end up ringing 911...? call The po-po is getting mad They're sending someone over to give me some "stick time".

Never had this issue before. Any guess as to what I'm missing or does this sound like a carrier issue?

Note: As a test, I tried dialing "Intercom 9 & 1 1 to see if this would ring 911, but it didn't...call didn't go anywhere. Somehow the system is seeing the "4" as a "9"?


D. Ocean
Miami, FL