|
|
Joined: Dec 2007
Posts: 114
Member
|
OP
Member
Joined: Dec 2007
Posts: 114 |
I have recently upgraded the software on two MICS systems from 7.0 to 7.0XC. When I rebooted the system, all the programming was the same with exception to a couple of minor things. Both systems had PRI's coming in and both systems would be able to dial out no problem, but when you would dial in to any number, you would hear a dial tone. The only way I could fix this was to completely start from scratch and redo all of the programming. I was just wondering if anyone else had ever run into this and if they found a way to fix it without reprogramming everything.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,287
Posts638,786
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|