I cannot access my Call Pilot's CP Manager using Internet Explorer. I type in the call pilot's IP address in the address bar eg: but no page is displayed. I was able to get in intitially to setup the IP address and other Initial info using a serial cable and the Hyper Terminal program. What was strange is that I could not do the same using a crossover ethernet cable and a PC initially. That's why I had to do it via a serial cable. I can ping the IP address of the CP 150 on the LAN, but cannot access the CP manager via IE. This is a brand new Call Pilot. Any suggestions? Thanks.

That's No moon, its a space station!