Creating a phantom loop on an Option 11|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Re: Creating a phantom loop on an Option 11 #143788 06/30/09 04:05 AM
Joined: Aug 2004 Posts: 1,631 Likes: 29 Calgary, AB, Canada Toner Admin
Toner Admin Joined: Aug 2004 Posts: 1,631 Likes: 29 Calgary, AB, Canada	I doubt it has to be 159 on an Option 11, but I do think there's a specific range it needs to fall into. I also highly doubt it can be "changed" from a 500 type to a phantom... I work with a phantom loop on an 81C that's # 156. Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
Creating a phantom loop on an Option 11	redramjim	06/29/09 03:34 AM
Re: Creating a phantom loop on an Option 11	mj_wald	06/30/09 06:16 AM
Re: Creating a phantom loop on an Option 11	Toner	06/30/09 08:05 AM
Re: Creating a phantom loop on an Option 11	mj_wald	06/30/09 12:41 PM
Re: Creating a phantom loop on an Option 11	Baron-B	07/08/09 05:11 PM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Creating a phantom loop on an Option 11