I have a customer with a 4port Flash on an 0x32 and the user's mailbox is acting up. I verified this myself. When listening to messages if you try to hit 77 to save or 6 to skip about 1 in 6 or 7 times you get this message "the system was unable to reach the number you specified fo message notification" as a recorded error message, this might happen twice and then maybe next time it will work it is kind of inconsitent. I looked at the msg notifications and there was a # programed in there that the user was not using so I removed it and deleted all the outdail selections, I also removed the Line out permission in the mailbox setup. And still got the same error. Could not find anything in the manual and have never run across this in 10 years any help would be great.
THanks, Jon