2 Company's share a 0X32 with a Flash Talk. Company 1 at one time was using voice mail in a limited way but no longer does. Company 2 (3 phones, 3 lines)decided they want to use voice mail and AA.
I setup table 2 with greeting 2 on all schedules (same greeting 24,7). Customer wants AA to answer calls immediately, I set each line in Flash programming to 0 rings and AA has been turned on,I called in to test and the calls followed the call forward no answer timer in capabilities for the lowest DN of the 3 phones, no matter what number of rings I set in flash AA would not answer, powered cycled Flash with no luck. In phone system programming the trunk lines are 078-080, these are the lines I programmed in Flash and when I couldn't get AA to answer I tried lines 18-20, this didn't work.

My work around for now, in trunks and lines I made prime set 299 (Flash DN number)for trunks 078-080, I set delay to prime at 2 rings, after 2 rings the calls are now going to AA.

Anyone think of any reason why Flash will not follow programming?

Software version on the 0X32 SP 30CQE06
Flash version 2.1.00

Dan S

We get old too soon, smart too late