OK, I'm a dyed-in-the wool Mitel tech. What I know about Panasonic would fill a thimble. However, our company got Shanghai'd into installing a NCP 1000 and a TVA 50. I figured out how to get the PBX working, however, I can't get the voice mail registered. I am using a 16 circuit DLP module and the TVA is equipped with one, 2-jack line input, which is supposed to be DLP and is on the motherboard. I called Panasonic tech support and the tech there told me to disable the 16 circuit DLP module and then, using the PC program, change the port type to voice mail. Well, that didn't work. What a waste of $90.

Does anyone know how to get the VM registered? I defaulted the VM as per installation instructions, set it for VM only and then returned the switches to 0000. All I have is a blinking green light.

One other situation is a cordless phone that won't register either. Any suggestions?

Rcaman

Americom, Inc.
Where The Art And Science Of Communications Meet