424 Single line ports can't break dial tone?|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

424 Single line ports can't break dial tone? #190838 09/12/07 10:47 AM
Joined: Oct 2005 Posts: 22 Canyon Lake,California CM OP Member
OP CM Member Joined: Oct 2005 Posts: 22 Canyon Lake,California	Hi Eveyone I have a customer with a DK424 w/ CD Processor, Cabinet one, has in order, 4 PDKU2, One RPTU2 and the last slot is open. Cabinet two,First slot open,then RSTU2 ,RCOU,PDKU. My trouble is ,RSTU ports will not break dial tone,I can call the voice mail and pass digits via intercom,but when I put my test set on the RSTU ports it will not break dial tone. So we cant light the MSG lights. What I have done is ,new RRCS card, new RSTU2 card,changed slots on the RSTU card. I have not replaced the Processor yet. This all started,after the installation of the PRI card. Any thoughts on this issue. Maybe someone has ran into this before. Chuck

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
424 Single line ports can't break dial tone?	CM	09/12/07 02:47 PM
Re: 424 Single line ports can't break dial tone?	www.telcom1.net	09/12/07 03:50 PM
Re: 424 Single line ports can't break dial tone?	breed	09/12/07 05:46 PM

Moderated by Carlos#1, phonemeister

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems 424 Single line ports can't break dial tone?