hi

i have a couple of extensions in our reception one is a 3524 with 60 key DSS, the other is a plain 3524......both have keys programmed as 610 DSS with the same extensions on each phone

the problem that has occurred in the last week is that the LED's on the 60 key (or at least some of them) dont match the other phone or reality...

eg

on 60 key a key may be showing flashing RED, on the other phone the LED is off (and the ext it refers to is not in use so the non-60key is correct)

it only seems to be affecting about 30% of the LEDS on the 60key...

ive tried resetting the 60key and the attached phone, and also deleting both the 610 definition and readding it - and also resetting the DSS on the PBX

its a CIX 670....

havent yet tried a complete power down...

any ideas welcome !

many thanks
dave