Have a Stratagy IPv8 R2 4 port that won't boot up after a power failure. (Site reports AC power flickered on/off serveral times due to power company problems, there PC's didn't like it much, either.)

I've checked the unit in my home CTX100, green pilot at top comes on, a few seconds later all LEDs light up, stays that way for a minute or so, then goes out an repeats the cycle.

Placing a serial terminal on com2 shows no apparent boot info. I assume the flash is corrupted or worse. Suggestions welcomed.

If unit is not recoverable, is there a reliable and reasonably priced third party repair service that you would suggest?

(PM's OK if such details not appropriate here.)

Macy Hallock - N8OBG - Medina, OH