|
|
|
|
Joined: Mar 2004
Posts: 880 Likes: 1
Member
|
OP
Member
Joined: Mar 2004
Posts: 880 Likes: 1 |
Ok, I'll put the T1/PRI combo card in shelf 2.
The documentation is confusing at best. What I have is two PRIBs in Shelf 0. One PRIB in Shelf 1 and am now adding a T1/PRI combo in Shelf 2 for networking.
The existing PRIB cards are configured as this...
Shelf 0 has two PRIB to the Telco and Shelf 1 has one PRIB to the Telco. The clock switch on all three are set to on (up). The clocking cables are connected as follows - 1st PRIB to Second PRIB. Second PRIB to Shelf 0 LMU1. Third PRIB clock cable to Shelf 1 LMU2.
Am I correct to connect Shelf 1 LMU2 clock out to Shelf 2 LMU1 clock in. Then connect the new T1/PRI combo to Shelf 2 LMU with clock switch on? off?
At the remote XTS should clock switch be on or off?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,287
Posts638,793
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
114
guests, and
396
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
